Delta EMC-PG01L PG Card

$195.30

  • Encoder Feedback Card, Line Driver
  • Compatible with C2000 Series


EMC-PG01L Encoder Feedback Card, Line Driver; VFD-C, CP

 

Terminals Descriptions
PG 1 VP Output voltage for power: +5 V / +12 V ± 5% (use FSW3 to switch +5 V / +12 V)
Max. output current: 200 mA
PG1 DCM Common for power and signal
PG 1 A1,  ̄A ̄1,
B1,  ̄B ̄1,
Z1,  ̄Z ̄1
Encoder input signal (Line Driver)
Open collector input: +5 V / +24 V *Note1
1-phase or 2-phase input
Max. input frequency: EMC-PG01L: 300 kHz; EMC-PG02L: 30 kHz
PG2 A2, A2  ̄ ̄,
B2,  ̄B ̄
Pulse input signal (Line Driver or Open Collector)
Open collector input: +5 V / +24 V *Note1
1-phase or 2-phase input
Max. input frequency: EMC-PG01L: 300 kHz; EMC-PG02L: 30 KHz
PG OUT
AO,
PG OUT AO,  ̄A ̄O,
BO,  ̄B ̄O,
ZO,  ̄Z ̄O, SG
PG card output signals. Division frequency function: 1 ~ 255 times
Max. output voltage for Line driver: 5 VDC
Max. output current: 15 mA
Max. output frequency: EMC-PG01L: 300 kHz; EMC-PG02L: 30 kHz
SG: The GND of PG card is the same as the host controller or PLC, so a common
output signal is attained