Delta EMC-PG01O Encoder Feedback Card

$150.30

  • Encoder Feedback Card, Open collector; VFD-C
  • Compatible with C2000 Series


EMC-PG01O Encoder Feedback Card, Open collector; VFD-C, CP

 

Terminals Descriptions
PG 1 VP Output voltage for power: +5 V / +12 V ± 5% (use FSW3 to switch +5 V / +12 V)
Max. output current: 200 mA
PG1 DCM Common for power and signal
PG 1 A1,  ̄A ̄1,
B1,  ̄B ̄1,
Z1,  ̄Z ̄1
Encoder input signal (Line Driver or Open Collector)
Open collector input: +5 V / +24 V *Note1
1-phase or 2-phase input
Max. input frequency: EMC-PG01O: 300 kHz; EMC-PG02O: 30 kHz
PG2 A2, A2  ̄ ̄,
B2,  ̄B ̄
Pulse input signal (Line Driver or Open Collector)
Open collector input: +5 V / +24 V (Note1)
1-phase or 2-phase input
Max. input frequency: EMC-PG01O: 300 kHz; EMC-PG02O: 30 kHz
PG OUT V+,  ̄V- Needs external power source for PG OUT circuit.
Input voltage of power:+12 V ~ +24 V
PG OUT V- Negative power supply input
PG OUT A / O, B / O, Z / O PG card output signals. Division frequency function: 1 ~ 255 times
Add a pull-up resistor to the open collector output signals to avoid signal
interferences.
[Three pull-up resistors are included in the package (1.8 KΩ / 1 W)] Max. Output current: 20 mA
Max output frequency: EMC-PG01O: 300 kHz; EMC-PG02O: 30 kHz